Spanner Card

 I have never tried a Spanner card before but I really love how it turned out, No dies needed

There is a video up on my YouTube channel talking you though exactly how to achieve this card fold. You can find it here 

Cardmaking Supplies

Creative Stamping Magazine Issue 137 Free stamp set

Creative Stamping Magazine Issue 137 digital papers

Acetate

Embossing powder in gold

Nuvo DRops in dirty bronze

Cardmaking Instructions

Begin with a sheet of card measuring 11 by  5 1/2 inch. Score this at 5 1/2 inch on the long side

This was turned onto the short side and scored at 1 1/2 and 4 inch down to the first score line

These 2 score lines were then cut

The two edge pieces were flicked back and a piece of acetate measuring 5 1/2 by 3 1/2 inch was glued onto the back

Matts and layers were created using the patterned papers and glitter card. The smaller Matts measure 1 1/4 by 5 1/4 and the patterned paper 1 by 5 inch. 

The larger panels matts measure 2 1/4 by 5 1/4 and the layers 2 by 5 inch

The sentiment was heat embossed and fussy cut out. The image was stamped, coloured and then glued onto the same colour as the card base before being fussy cut out. These were then glued onto the acetate panel.

The acetate panel was then finished with the Nuvo drops

Thanks for reading