Sweet November Stamps New Release May 2024

 

I am super excited to be involved in the new Sweet November Stamps Release. I had to take a step back due to my university commitments for the last few releases but now that is all handed in I get to join back in the fun. Don't forget Crafty Purple Frog are the UKs exclusive stockist.

Don't forget to join in our Instagram hop and there is a YouTube hop

 

Card Making Supplies:-

Sweet November Stamps Merwee Party Clear Stamps

Sweet November Stamps Soft Seashore Shaker Mix

Acetate

Versamark Ink

Silver Embossing Powder( This is from an old Papercraft Society Box I need to place a WOW order)

A4 Teal Card

White Stamping Stamp

Copic Markers

Momento Dew Drops in Teal Zeal and Danube Blue

Card Making Instructions:-

The scene was stamped using the images into a panel measuring 6 3/4 inch by 3 7/8. This was coloured up using my Copic Markers

To create the card base itself. I took a sheet of A4 and cut to 6inch along the short side. Leaving a 1 inch gap this was then scored at 1 and 5 inch. This needs to extend down the card to 8 1/2inch. The card was rotated to long side and scored at 1 inch and 8 1/2 inch between the two score marks you created. It was scored at 7 1/2 on the outside of the long score marks and then all the way across the card at 9 1/2 (See video for clarity). The long score lines were then cut using a craft knife.

On a piece of A4 stamping card I cut the short axis to 5 3/4 inch. Leaving a gap of 3/4 inch from the top the card was scored at 3/4 inch and 5 inch. These extended to 8 3/4 inch. The card was cut at 9 1/4 inch. The inside rectangle was cut away using a craft knife and the long side scored at 7 3/8 then folded into a mountain fold

This was laid on a piece of acetate and draw around with a pencil. The pencil lines were scored and a 1/4 inch margin added to all sides, including inside and then cut. A separate piece of acetate measuring 6 1/4 x 2 1/4 was cut and score at 1/4 inch on all edges.

The white card panels were stamped using the memento dew drops and the small stamps from with in the set. I secured the acetate using double sided sided tape to create shaker pockets and filled these with the shaker elements. These were I wanted then to hold immediately.

The sentiment was heat embossed and fussy cut out before being adhered with a drop of glue.